YT1200S type geosynthetic material direct shear drawing friction tester (servo system) is used for direct shear friction test between various geosynthetic materials and soil and rock materials and friction test of the drawing resistance between the geosynthetic material in the soil and the surrounding soil.

JTG E50-2006 T1129 Highway Engineering Geosynthetics Test Code Direct Shear Friction Characteristics Test

JTG E50-2006 T1130 Highway Engineering Geosynthetics Test Regulations Pull-out friction characteristic test

SL235-2012 Geotechnical Material Water Conservancy Test Regulation

GB/T17635.1-98 Geotextile and related products Determination of friction characteristics

Note: meet the above standards, but not limited to the above standards;

1. This machine is multi-purpose, and can be used for direct shear friction test of geotechnical materials and pull-out friction test of geotechnical materials.

2. Using microcomputer servo control normal force dynamic test system, normal force test units Mpa, Kpa, kgf/mm2, N/mm2, N/cm2 are optional, and can directly display data such as force value and area;

3. In the test program, the shear stress is directly converted into kilopascals without manual conversion. The normal force and the shear force are all driven by a servo drive system, a dynamic load adjustment system, and the test data is accurate.

4. The all-stainless steel work surface is easy to clean and tidy up, effectively preventing soil particles from entering the inside of the instrument.

5. Configure JIGAOTEST expert test software, with software copyright certificate, certificate number: 2018SR124282

6. The dynamic data collection frequency is more than 3000 times per second, which more objectively reflects the mechanical properties of the material;

7. Philips RM32-bit industrial-grade single-chip microcomputer control, 16-bit A/D converter, strong anti-interference performance and fast data transmission;

8. The computer processes reports, graphics, screen display or print output; supports remote online software upgrades

9. Operating software system function: the instrument can be connected to the PC: record the whole process of the test, real-time display graphs, shear force, pull-out force, can calculate the test date, shear stress, horizontal displacement and other data and graphs. It can analyze the data change process at each stage in the test process in detail. Various statistical index data such as various CV values ??can be saved and exported to an Excel table at will.