Used to measure various fabric samples. Due to the capillary effect of the fiber, the test solution in the constant temperature bath is sucked up to a certain height to evaluate the water absorption and air permeability of the fabric.
【Conform to the standard】:
FZ/T01071, etc.
【technical parameter】:
1. The maximum number of test roots: 200×25mm 10 roots
2. Weight of tension clamp: 3±0.5g
3. Power consumption: ≤400W
4. Preset temperature range: ≤60±2℃ (optional according to requirements)
5. Operating time range: ≤99.99min (optional as required)
6. Water tank size: 400×90×110mm
(The capacity of the test solution is about 2500mL)
Service hotline：
Receipt mail：
