[scope of application]
Used for Geosynthetics in transportation, water conservancy, Tunnel, construction and other industries, including geotextiles, composite geotextiles, geogrids, geomembrane and related products of the tensile, tearing, bursting, peeling, joint and other properties of the test.
[Related Standards]
JTGE50-2006 / T1123-2006 strip tensile test
JTGE50-2006 / T1121-2006 Wide strip tensile test
JTGE50-2006 / T1125-2006 trapezoid tear force test
JTGE50-2006 / T1126-2006 CBR breaking strength test
JTGE50-2006 Test code for highway Engineering geosynthesis materials /T1143-2006 Pressure bending strength test of core belt of plastic drainage belt
JTT925.1-2014 Highway engineering geosynthetic geogrpart 1 steel plastic grille / 6.4 strength, elongation
GBT17689-2008 Plastic geogrid / 6.5 Mechanical properties GBT21825-2008 Fiberglass geogrid / Appendix B Determination of fracture strength and fracture elongation of glass fiber geogrid
GBT15788-2016 Wide strip tensile test of geotextile and its related products
GBT17688-1999 Geosynthetics PVC geomembrane / 5.8 Tensile strength and fracture elongation
GBT1040.3-2006 Determination of the tensile properties of plastics- -Part 3: Test conditions for thin films and sheets
GBT17688-1999 Geosynthetics polyvinyl chloride geomembrane / 5.9 fracture strength
GBT3923.1-2013 Tensile properties of textile fabrics- -Part 1 fracture strength and fracture elongation GBT13763-2010 Determination of tear strength by geosynthesis material trapezoidal method
GBT14800-2010 Static breaking Test (CBR)
JTT925.1-2014 Highway engineering geosynthetic material geogrid-Part 1 Steel-plastic grille / Appendix A connection point limit separation force test
JTT480-2001 Traffic engineering geosynthetic material geogrid / Appendix A Determination of the ultimate stripping force of adhesive welding geogrid
FZT01010-1991 Coated fabric The method for determination of adhesive strength of fabric coatings
JTT516-2004 Highway engineering geosynthetics geochamber / 7.2 chamber sheet tensile yield strength GBT19274-2003 Geosynthetics, plastic geotechnical chamber / 7.7 chamber sheet tensile yield strength JTT516-2004 Highway engineering geosynthetics technical room / 7.3, tensile strength at the welding site GBT19274-2003 Tensile strength at welding site / 7.8 JTT516-2004 Highway engineering geosynthetics geotechnical chamber / 7.4 The tensile strength of the junction between the geotechnical chamber groups GBT19274-2003 Geosynthetic materials plastic geotechnical chamber / 7.9 The tensile strength between the group joints of geotechnical chambers
JTT516-2004 Highway engineering geosynthetics geotechnical chamber / 7.5 Enhance the shear force of the geotechnical chamber connections GBT26941.
3-2011 6.4.4 compartment
[Instrument characteristics]
● The load element adopts 0.5 level high precision force measuring sensor.
● Adopt high-end all-aluminum alloy shape design, surface sandblasting anodized oxidation process treatment.
● Chinese and English dual interface arbitrary switch, test curve, chart, data dynamic display.
● Advanced digital signal processing (DSP) technology, Philips 32-bit full digital control and 2500 f / s high-speed data acquisition.
● Precision preload ball screw, no reverse clearance, high positioning accuracy.
● Non-clutch drive, operating at full speed at maximum force.
● Fully comply with "Mechanical Equipment 2006 / 42 / EC", "Low Voltage 2006 / 95 / EC", "EMC directive 20044 / 108 / EC" and GOST-R;