[Related Standards] JTGE50-2006 / T1123-2006 strip tensile test JTGE50-2006 / T1121-2006 Wide strip tensile test JTGE50-2006 / T1125-2006 trapezoid tear force test JTGE50-2006 / T1126-2006 CBR breaking strength test JTGE50-2006 Test code for highway Engineering geosynthesis materials / T1143-2006 Pressure bending strength test of core belt of plastic drainage belt JTT925.1-2014 Highway engineering geosynthetic geogrpart 1 steel plastic grille / 6.4 strength, elongation GBT17689-2008 Plastic geogrid / 6.5 Mechanical properties GBT21825-2008 Fiberglass geogrid / Appendix B Determination of fracture strength and fracture elongation of glass fiber geogrid GBT15788-2016 Wide strip tensile test of geotextile and its related products GBT17688-1999 Geosynthetics PVC geomembrane / 5.8 Tensile strength and fracture elongation GBT1040.3-2006 Determination of the tensile properties of plastics- -Part 3: Test conditions for thin films and sheets GBT17688-1999 Geosynthetics polyvinyl chloride geomembrane / 5.9 fracture strength GBT3923.1-2013 Tensile properties of textile fabrics- -Part 1 fracture strength and fracture elongation GBT13763-2010 Determination of tear strength by geosynthesis material trapezoidal method GBT14800-2010 Static breaking Test (CBR) JTT925.1-2014 Highway engineering geosynthetic material geogrid-Part 1 Steel-plastic grille / Appendix A connection point limit separation force test JTT480-2001 Traffic engineering geosynthetic material geogrid / Appendix A Determination of the ultimate stripping force of adhesive welding geogrid FZT01010-1991 Coated fabric The method for determination of adhesive strength of fabric coatings JTT516-2004 Highway engineering geosynthetics geochamber / 7.2 chamber sheet tensile yield strength GBT19274-2003 Geosynthetics, plastic geotechnical chamber / 7.7 chamber sheet tensile yield strength JTT516-2004 Highway engineering geosynthetics technical room / 7.3, tensile strength at the welding site GBT19274-2003 Tensile strength at welding site / 7.8 JTT516-2004 Highway engineering geosynthetics geotechnical chamber / 7.4 The tensile strength of the junction between the geotechnical chamber groups GBT19274-2003 Geosynthetic material plastic

[Instrument characteristics] ● The load element adopts 0.5 level high precision force measuring sensor. ● Adopt high-end all-aluminum alloy shape design, surface sandblasting anodized oxidation process treatment. ● Chinese and English dual interface arbitrary switch, test curve, chart, data dynamic display. ● Advanced digital signal processing (DSP) technology, Philips 32-bit full digital control and 2500 f / s high-speed data acquisition. ● Precision preload ball screw, no reverse clearance, high positioning accuracy. ● Non-clutch drive, operating at full speed at maximum force. ● Fully comply with "Mechanical Equipment 2006 / 42 / EC", "Low Voltage 2006 / 95 / EC", "EMC directive 20044 / 108 / EC" and GOST-R;